| VDSL Product Range |
VDSL(Very high data rate Digital Subscriber Line) is an asymmetric version of DSL that is used as the final drop from a fiber optic junction point to nearby customers. VDSL lets an apartment or office complex obtain high-bandwidth services using existing copper wires without having to replace the infrastructure with optical fiber. Like ADSL, VDSL can share the line with the telephone.
LanTecs' VDSL products prodives 4/1M, 5M/10M/15 Mbit/s per port (up to 32 Mbit/s full duplex) symmetrical bandwidth over phone wiring with long driver capable 1.9/1.5/1.2/1 km.
|
|
 |
|
Lokal VDSL Modem for VC-102RT
This is an Ethernet to VDSL CO side adapter that enables high speed internet access to building residents, access campuses students and hotel guests by connecting Ehternet equipped computers, set-top box or any internet device to the existing telephone wires. The VDSL converter uses the phoneline networking technology endorsed by the VDSL, an association of industry-leading companies for in -networking focus on the existing telephone wire and provides a RJ-45 console port for monitor VDSL status and configure speed. The VC-102LT (VDSL CO Modem) is simple to install and use. One RJ-45 Ethernet connects to a Router, Ethernet Switch or to LAN card. The RJ11 ports available to connect to any existing modular phone jack. There are two RJ-11 jack on the Converter to provide a phone extensions.
|
|
Order No.: VC-102LT
|
|
|
Remote VDSL Modem for Switches and VC-102LT
The Netsys VDSL CPE Modem (VC-102RT) provides a cost effective remote unit for the VS-2400 and VS-800 VDSL Managed Concentrator and NV-200LC VDSL CO Modem. The VC-102RT features one Ethernet port and a built-in POTS/IDSN splitter.No software installation makes the converter highly compatible with different operating system. The VDSL CPE Modem NV-200 comes ready to plug and play out of the box for distances up to 4,000 feet (1219m) at its default line rate of 10Mbps, which is perfect for most applications. The VC-102RT can also be configured to operate at 5Mbps to achieve maximum distances up to 5,000 feet (1524m) and 15Mbps to achieve maximum line speed when distances are below 3,200 feet (975m). With the VS-2400 and VS-800 VDSL Managed Concentrator, each link can be throttled from 100 Kbit/s to 5/10/15 Mbit/s by using the unique bandwidth management features. The VDSL Solution also features the ability to extend telephone (POTS/ISDN/PBX) service over the same 2 wires and features built-in surge protection and POTS/ISDN splitters to eliminate external splitter devices.
|
|
Order No.: VC-102RT
|
|
Managed VS-800 VDSL Switch
The NV-800S Managed VDSL IP DSLAM provides an intelligent solution for delivering network and broadband services to the SOHO and MTU/MDU with speeds up to 15Mbps and distances up to 5,000 feet (1524m) over existing phone lines. The VS-800' 10/100 Ethernet Uplink Port connects to a Router or Ethernet Switch and acts as the bridge to the cost Internet for end-users connected through the VS-800' 8 VDSL ports. The second 10/100 Ethernet Uplink Port may be used for cascading additional VS-800 units or connecting to a video-on-demand server or other IP capable system for distributing content to the end-user. The NV-800S also features built-in POTS/ISDN splitters so that the VDSL service can share the existing phone line with the end-users' POTS/ISDN telephone service, thus reducing and overall wiring requirements.
|
|
Order No.: VS-800
|
|
|
Managed VS-2400 VDSL Switch
The VS-2400 Managed VDSL IP DSLAM Switch with 2 Gigabit Ports for Fiber or Copper provides an intelligent solution for delivering network and easy broadband services to the MTU/MDU and campus with controlled speeds up to 15 Mbit/s and distances up to 5,000 feet (1524m) over existing phone lines. The VS-2400 is a cost-effective solution that allows for fast and installation into existing building infrastructure.
Performance: 8.8 Gbit/s switching fabric with 4.72 Gbit/s max. forwarding bandwidth 6.5 Mpps (Forwarding rates based on 64byte packets). Provides 24 x 4/1,5/10/15M VDSL ports with RJ-21connector for connecting client side and 1 x 10/100/1000Mbps RJ-45 Port for Ethernet and 1 x 10/100/1000 Mbit/s copper/fiber port.
|
|
Order No.: VS-1200
|
|
|
|
|
|
|
|
